It can be used in a wide range. The application principle of pneumatic conveying equipment is very simple, and the conveying process is also simple. It can transport a wide range of operation, move flexibly and conveniently, and can supply and transport continuously. It can adapt to the transportation of various raw materials

可減少污染，潔凈,氣力輸送系統采用封閉式輸送方式，避免粉塵飛揚，能夠很好的保證物料不受任何的粉塵污染，改善車間衛生條件，有利于環境保護。

It can reduce pollution, protect the environment and be clean. The pneumatic conveying system adopts closed conveying mode to avoid dust flying, which can well ensure that the materials are not polluted by any dust, improve the sanitary conditions of the workshop and be conducive to environmental protection.

可充分利用空間，占地面積小,帶式輸送機、螺旋輸送機等輸送機械實質上是朝一個方向輸送，而氣力輸送系統可以向上、向下或圍繞建筑物等障礙物輸送物料，其輸送管可高出或避開其他裝置或設備所占用的空間

It can make full use of space and occupies a small area. Belt conveyor, screw conveyor and other conveying machinery are essentially conveying in one direction, while the pneumatic conveying system can transport materials up, down or around obstacles such as buildings, and its conveying pipe can be higher than or avoid the space occupied by other devices or equipment

可減少設備成本，維護方便,氣力輸送系統設備簡單，運動零部件少，物料破損和設備磨損較小，即可節省能耗，維修保養也方便，易于實現自動化。

It can reduce the equipment cost and facilitate maintenance. The pneumatic conveying system has simple equipment, few moving parts, less material damage and equipment wear, which can save energy consumption, convenient maintenance and easy automation.

可實現多種工藝處理。采用氣力輸送系統在輸送過程中或輸送終端能同時進行其它工藝操作，如混合、粉碎、分級、干燥、冷卻、除塵和其它化學反應，提高生產效率。

It can realize a variety of process treatment. Using pneumatic conveying system, other process operations, such as mixing, crushing, grading, drying, cooling, dust removal and other chemical reactions, can be carried out at the same time in the conveying process or at the conveying terminal, so as to improve the production efficiency.

風管的維護：風管在吸送式輸送系統中指除塵器后風機進風口間以及風機出風口風帽之間的管道，一般講,這兩部分管道維修量不大，但必須注意風管連接處的密封情況，經常注意風管本體是否有銹鉵，風帽的損壞會造成雨水罐入，也應及時修補，而在壓送式輸送系統中風管包括了從氣體壓縮機排出口起直到供料器(或發送罐)的進氣口，連同這中間的貯氣罐、氣水分離器、供氣系統及相應的配管.貯氣罐與氣水分離器屬于壓力容器，應遵照壓力容器的使用要求定期檢查其性

Maintenance of air duct: in the suction conveying system, the air duct refers to the pipeline from the back of the dust collector to the air inlet of the fan and from the air outlet of the fan to the hood. Generally speaking, the maintenance of these two parts of the pipeline is not large, but we must pay attention to the sealing of the connection of the air duct, and often pay attention to whether there is rust on the air duct body. The damage of the hood will cause rainwater tank entry, which should also be repaired in time, In the pressure conveying system, the stroke pipe includes the air inlet from the discharge port of the gas compressor to the feeder (or sending tank), together with the air storage tank, gas-water separator, air supply system and corresponding piping The gas storage tank and gas-water separator belong to pressure vessels, and their safety shall be checked regularly according to the use requirements of pressure vessels

今日就是小編為大家?guī)淼木蕛?nèi)容，更多的精彩內容關注我們的網站：氣力輸送設備http://www.lzdbgs.com.cn

Today is the wonderful content that Xiaobian brings to you. More wonderful content focuses on our website: pneumatic conveying equipment http://www.lzdbgs.com.cn